Structural Color Inks Containing Photonic Microbeads for Direct Writing.

Printing structurally colored patterns is of great importance for providing customized graphics for various purposes. Although a direct writing technique has been developed, the use of colloidal dispersions as photonic inks requires delicate printing conditions and restricts the mechanical and optical properties of printed patterns. In this work, we produce elastic photonic microbeads through scalable bulk emulsification and formulate photonic inks containing microbeads for direct writing. To produce the microbeads, a photocurable colloidal dispersion is emulsified into a highly concentrated sucrose solution via vortexing, which results in spherical emulsion droplets with a relatively narrow size distribution. The microbeads are produced by photopolymerization and are then suspended in urethane acrylate resin at volume fractions of 0.35-0.45. The photonic inks retain high color saturation of the microbeads and offer enhanced printability and dimensional control on various target substrates including fabrics, papers, and even skins. Importantly, the printed graphics show high mechanical stability as the elastic microbeads are embedded in the polyurethane matrix. Moreover, the colors show a wide viewing angle and low-angle dependency due to the optical isotropy of individual microbeads and light refraction at the air-matrix interface. We postulate that this versatile direct writing technique is potentially useful for structural color coating and printing on the surfaces of arbitrary 3D objects.

Effects of different hot-air drying methods on the dynamic changes in color, nutrient and aroma quality of three chili pepper (Capsicum annuum L.) varieties.

The effects of constant and variable temperature hot-air drying methods on drying time, colors, nutrients, and volatile compounds of three chili pepper varieties were investigated in this study. Overall, the variable temperature drying could facilitate the removal of water, preserve surface color, and reduce the loss of total sugar, total acid, fat and capsaicin contents. Electronic-nose (E-nose) and gas chromatography-ion mobility spectroscopy (GC-IMS) analyses found that aldehydes, ketones, alcohols and esters contributed to the aroma of chili peppers. The drying process led to an increase in acids, furans and sulfides contents, while decreasing alcohols, esters and olefins levels. In addition, the three chili pepper varieties displayed distinct physical characteristics, drying times, chromatic values, nutrients levels and volatile profiles during dehydration. This study suggests variable temperature drying is a practical approach to reduce drying time, save costs, and maintain the commercial appeal of chili peppers.

The effects of brightness and prominent colors on outdoor thermal perception in Chongqing, China.

Outdoor thermal comfort has become an important factor affecting human mental and physical health due to rapid urbanization. This study aimed to investigate the influence of brightness and prominent colors on thermal perception in hot summer and cold winter regions. Meteorological measurements were conducted accompanied by subjective thermal and visual questionnaires (n = 2020) during summer and winter. The physiological equivalent temperature (PET) was applied as thermal indices to evaluate the influence of visual conditions on thermal perception. The results showed that (1) the neutral PET is 20.2 °C with a range of 14.8 ~ 25.7 °C in Chongqing and neutral illumination range is 0 ~ 8663 lx. (2) Thermal sensitivity is most great in neutral brightness than bright and too bright groups. The influence of outdoor prominent colors in winter supports hue-heat hypothesis. However, in summer, result only supports the hypothesis under low thermal stress. Both cool and warm colors can reduce the thermal sensitivity of visitors compared to neutral colors (gray and white). (3) The interactions between colors and brightness are more obvious under low thermal stress levels. (4) Thermal perceptions of females are more greatly affected by brightness and prominent colors compared with males. These results could help landscape designers better understand the correlation between the thermal and visual environments and provide a reference for comprehensive designs of urban open spaces.

Aesthetic Cellulose Filaments with Water-Triggered Switchable Internal Stress and Customizable Polarized Iridescence Toward Green Fashion Innovation.

Healthy, convenient, and aesthetic hair dyeing and styling are essential to fashion trends and personal-social interactions. Herein, we fabricate green, scalable, and aesthetic regenerated cellulose filaments (ACFs) with customizable iridescent colors, outstanding mechanical properties, and water-triggered moldability for convenient and fashionable artificial hairdressing. The fabrication of ACFs involves cellulose dissolution, cross-linking, wet-spinning, and nanostructured orientation. Notably, the cross-linking strategy endows the ACFs with significantly weakened internal stress, confirmed by monitoring the offset of the C-O-C group in the cellulose molecular chain with Raman imaging, which ensures a tailorable orientation of the nanostructure during wet stretching and tunable iridescent polarization colors. Interestingly, ACFs can be tailored for three-dimensional shaping through a facile water-triggered adjustable internal stress: temporary shaping with low-level internal stress in the wet state and permanent shaping with high-level internal stress in the dry state. The health, convenience, and green aesthetic filaments show great potential in personal wearables.

Hydrogen Bond-Mediated Self-Shielded Moisture-Responsive Structural Color for Time-Temperature Indicating.

Effective monitoring of the time-temperature history of biological reagents, chemical drugs, and perishable foods during cold chain storage is crucial for ensuring their quality and efficacy. Time-temperature indicators (TTIs) are developed to assess the cumulative impact of time and temperature on product quality. However, current indicators face challenges related to complex wrapping procedures, narrow tracking ranges, susceptibility to photobleaching, and pre-use instability, hampering widespread use. Herein, the first moisture-responsive 1D photonic crystal (1DPC) TTIs featuring robust structural colors, customizable time-temperature ranges, and reliable renewability are demonstrated. The indicators exhibit distinct color-changing responsiveness toward water vapor, which remains observable after prolonged storage at low temperatures. Significantly, the moisture responsiveness gradually diminishes at elevated temperatures over time due to ambient water-induced hydrogen bond formation, effectively shielding the indicator from external stimuli. This property enables the naked-eye inspection of product efficacy during cold chain storage. Additionally, the endowed flexibility of the TTI facilitates its easy attachment to targets, functioning as a convenient indicator label. Remarkably, the indicator can be stably stored for an extended period at room temperature before use, thereby showcasing substantial market potential.

Smart colloidal photonic crystal sensors.

Smart colloidal photonic crystals (PCs) with stimuli-responsive periodic micro/nano-structures, photonic bandgaps, and structural colors have shown unique advantages (high sensitivity, visual readout, wireless characteristics, etc.) in sensing by outputting diverse structural colors and reflection signals. In this review, smart PC sensors are summarized according to their fabrications, structures, sensing mechanisms, and applications. The fabrications of colloidal PCs are mainly by self-assembling the well-defined nanoparticles into the periodical structure (supersaturation-, polymerization-, evaporation-, shear-, interaction-, and field-induced self-assembly process). Their structures can be divided into two groups: closely packed and non-closely packed nano-structures. The sensing mechanisms can be explained by Bragg's law, including the change in the effective refractive index, lattice constant, and the order degree. The sensing applications are detailly introduced according to the analytes of the target, including solvents, vapors, humidity, mechanical force, temperature, electrical field, magnetic field, pH, ions/molecules, and so on. Finally, the corresponding challenges and the future potential prospects of artificial smart colloidal PCs in the sensing field are discussed.

Solanum pseudocapsicum vs Capsicum annum; comparative phenolics profiling using green ultrasonic extraction and UHPLC analysis.

BACKGROUND: Solanum pseudocapsicum (PC) and Capsicum annum (CA) belongs to the family of Solanaceae. CA have been reported a rich source of phenolics whereas, the phenolics content of GA (gallic acid), SC (scopoletin), RA (rosmarinic acid), and RV (resveratrol) are yet to be reported for the PC-fruit. This study comparatively evaluates the phenolics profile for different parts (seeds and skin) and colors (green and red) of the PC- and CA-fruits using the green solvents of ethanol (ET), acetone (AC), water (H2O), and different combinations of these solvents. METHODOLOGY: Ultrasonics extraction (US) and UHPLC analysis were employed for phenolics evaluation. RESULTS: The USMD (method development) revealed the highest extract yield of 62 mg/100 mg for the PC-skin in ET:AC (70:30) solvent whereas, more phenolics (ppm) were observed for PC-seeds in ET:AC (50:50) solvent, particularly the SC (29.46) and GA (16.92). The UHPLCMDMV exhibited significant accuracies (100.70-114.14 %) with r2-values (0.9993-0.9997) in the linearity range of 1-200 ppm. The USMV (method validation) in PC- and CA-fruit parts and colors revealed more extract yields for the red skin part of the PC- (180.5 mg) and CA-fruit (126.2 mg). The phenolics were seen more in the green seeds of the PC-fruit (ppm); SC (276), GA (147.36), RV (28.54), and RA (23.87) followed by the green PC-skin, and red/green CA-seeds. The statistical models of mean differences, ANOVA, and Pearson's correlation showed significant differences for the PC-fruit parts (seeds and skin) and colors (red and green) vs extract yield and phenolics content (P = 0.05). CONCLUSION: PC-and CA-fruits were successfully evaluated where the seeds for the green fruits exhibited more phenolics amount.

Selective Partitioned Regression for Accurate Kidney Health Monitoring.

The number of people diagnosed with advanced stages of kidney disease have been rising every year. Early detection and constant monitoring are the only minimally invasive means to prevent severe kidney damage or kidney failure. We propose a cost-effective machine learning-based testing system that can facilitate inexpensive yet accurate kidney health checks. Our proposed framework, which was developed into an iPhone application, uses a camera-based bio-sensor and state-of-the-art classical machine learning and deep learning techniques for predicting the concentration of creatinine in the sample, based on colorimetric change in the test strip. The predicted creatinine concentration is then used to classify the severity of the kidney disease as healthy, intermediate, or critical. In this article, we focus on the effectiveness of machine learning models to translate the colorimetric reaction to kidney health prediction. In this setting, we thoroughly evaluated the effectiveness of our novel proposed models against state-of-the-art classical machine learning and deep learning approaches. Additionally, we executed a number of ablation studies to measure the performance of our model when trained using different meta-parameter choices. Our evaluation results indicate that our selective partitioned regression (SPR) model, using histogram of colors-based features and a histogram gradient boosted trees underlying estimator, exhibits much better overall prediction performance compared to state-of-the-art methods. Our initial study indicates that SPR can be an effective tool for detecting the severity of kidney disease using inexpensive lateral flow assay test strips and a smart phone-based application. Additional work is needed to verify the performance of the model in various settings.

Time-Dependent and Excitation-Dependent Afterglow Color Evolution from the Assembly of Dual Carbon Dots in Zeolite.

Afterglow materials with time-dependent color output emerge as huge prospects in advanced optical information encryption but remain a formidable challenge due to the limited exciton transfer from a single emission center. Here, multiple time-dependent afterglow color evolutions are achieved by the strategy of controllable assembly of dual carbon dots (CDs) with an individual afterglow color and decay rate into an RHO zeolite. The strategy possesses high controllability such that B-CDs and G-CDs can be independently generated and in situ embedded into a matrix; in particular, the doped amount of two kinds of CDs can be adjusted conveniently to produce interesting variable afterglow colors. Triggered by different excitations, the prepared B&G-CDs@RHO composites exhibit the conversion of TADF and RTP behaviors, as well as time-dependent afterglow color output from deep-blue to green (365 nm excitation) and static cyan (254 nm excitation). The unique luminescence and excellent stability allow the composite applied in information encryption with high-security levels.

Aluminum, a colorful gamechanger: Uptake of an aluminum-containing food color in human cells and its implications for human health.

Aluminum is added to many food colors to change their solubility. This study compares the aluminum-containing food color carmine with its aluminum-free version carminic acid (both E 120), hypothesizing that the addition of aluminum does not only change the color's solubility, but also its effects on human cells. We could show that carmine, but not carminic acid, is taken up by gastrointestinal Caco-2 and umbilical vein endothelial cells (HUVEC). Clear differences between gene expression profiles of Caco-2 cells exposed to carmine, carminic acid or control were shown. KEGG analysis revealed that carmine-specific genes suppress oxidative phosphorylation, and showed that this suppression is associated with neurodegenerative diseases such as Alzheimer and Parkinson disease. Furthermore, carmine, but not carminic acid, increased proliferation of Caco-2 cells. Our findings show that a food color containing aluminum induces different cellular effects compared to its aluminum-free form, which is currently not considered in EU legislation.

Centrifuge fractionation during purification of cellulose nanocrystals after acid hydrolysis and consequences on their chiral self-assembly.

The inherent colloidal dispersity (due to length, aspect ratio, surface charge heterogeneity) of CNCs, when produced using the typical traditional sulfuric acid hydrolysis route, presents a great challenge when interpreting colloidal properties and linking the CNC film nanostructure to the helicoidal self-assembly mechanism during drying. Indeed, further improvement of this CNC preparation route is required to yield films with better control over the CNC pitch and optical properties. Here we present a modified CNC-preparation protocol, by fractionating and harvesting CNCs with different average surface charges, rod lengths, aspect ratios, already during the centrifugation steps after hydrolysis. This enables faster CNC fractionation, because it is performed in a high ionic strength aqueous medium. By comparing dry films from the three CNC fractions, discrepancies in the CNC self-assembly and structural colors were clearly observed. Conclusively, we demonstrate a fast protocol to harvest different populations of CNCs, that enable tailored refinement of structural colors in CNC films.

Advanced Additive Manufacturing of Structurally-Colored Architectures.

Direct ink writing (DIW) stands out as a facile additive manufacturing method, minimizing material waste. Nonetheless, developing homogeneous Bingham inks with high yield stress and swift liquid-to-solid transitions for versatile 3D printing remains a challenge. In this study, high-performance Bingham inks are formulated by destabilizing silica particle suspensions in acrylate-based resin. A colloidal network forms in the shear-free state through interparticle attraction, achieved by disrupting the solvation layer of large resin molecules using polar molecules. The network is highly dense, with evenly distributed linkage strength as monodisperse particles undergo gelation at an ultra-high fraction. Crucially, the strength is calibrated to ensure a sufficiently large yield stress, while still allowing the network to reversibly melt under shear flow. The inks immediately undergo a liquid-to-solid transition upon discharge, while maintaining fluidity without nozzle clogging. The dense colloidal networks develop structural colors due to the short-range order. This enables the rapid and sophisticated drawing of structurally-colored 3D structures, relying solely on rheological properties. Moreover, the printed composite structures exhibit high mechanical stability due to the presence of the colloidal network, which expands the range of potential applications.

Auxetic Photonic Patterns with Ultrasensitive Mechanochromism.

Photonic crystals with mechanochromic properties are currently under intensive study to provide intuitive colorimetric detection of strains for various applications. However, the sensitivity of color change to strain is intrinsically limited, as the degree of deformation determines the wavelength shift. To overcome this limitation, auxetic photonic patterns that exhibit ultra-sensitive mechanochromism are designed. These patterns have a regular arrangement of cuts that expand to accommodate the strain, while the skeletal framework undergoes torsional deformation. Elastic photonic crystals composed of a non-close-packed array of colloidal particles are embedded in the cut area of the auxetic patterns. As the cut area amplifies the strains, the elastic photonic crystals show significant color change even for small total strains. The degree of local-strain amplification, or sensitivity of color change, is controllable by adjusting the width of cuts in the auxetic framework. In this work, a maximum sensitivity of up to 60 nm/% is achieved, which is 20 times higher than bulk films. It is believed that the auxetic photonic patterns with ultra-sensitive mechanochromism will provide new opportunities for the pragmatic use of mechanochromic materials in various fields, including structural health monitoring.

Regioselective Growth of Colloidal Crystals Induced by Depletion Attraction.

Colloidal crystals display photonic stopbands that generate reflective structural colors. While micropatterning offers significant value for various applications, the resolution is somewhat limited for conventional top-down approaches. In this work, a simple, single-step bottom-up approach is introduced to produce photonic micropatterns through depletion-mediated regioselective growth of colloidal crystals. Lithographically-featured micropatterns with planar surfaces and nano-needle arrays as substrates are employed. Heterogeneous nucleation is drastically suppressed on nano-needle arrays due to minimal particle-to-needles overlap of excluded volumes, while it is promoted on planar surfaces with large particle-to-plane volume overlap, enabling regioselective growth of colloidal crystals. This strategy allows high-resolution micropatterning of colloidal photonic crystals, with a minimum feature size as small as 10 µm. Stopband positions, or structural colors, are controllable through concentration and depletant and salt, as well as particle size. Notably, secondary colors can be created through structural color mixing by simultaneously crystallizing two different particle sizes into their own crystal grains, resulting in two distinct reflectance peaks at controlled wavelengths. The simple and highly reproducible method for regioselective colloidal crystallization provides a general route for designing elaborate photonic micropatterns suitable for various applications.

Pyrolysis of Al-Based Metal-Organic Frameworks to Carbon Dot-Porous Al2 O3 Composites With Time-Dependent Phosphorescence Colors for Advanced Information Encryption.

Phosphorescent materials with time-dependent phosphorescence colors (TDPCs) have great potential in advanced optical applications. Synthesis of such materials is attractive but challenging. Here, a series of carbon dot-porous Al2 O3 composites exhibiting distinctive TDPC characteristics is prepared by high-temperature pyrolysis of Al-based metal-organic frameworks NH2 -MIL-101(Al). The composite synthesized at 700 °C (CDs@Al2 O3 -700) shows an obvious change in phosphorescence color from blue to green after removing the excitation light of 280 nm. Photophysical analysis reveals that two emission centers in CDs, namely carbon core and surface states, are responsible for the short-lived blue phosphorescence (96 ms) and long-lived green phosphorescence (911 ms), respectively. The combination of blue and green phosphorescence with different decay rates triggering the interesting TDPC phenomenon. CDs@Al2 O3 -700 has a significantly high phosphorescence quantum yield of up to 41.7% and possesses an excellent optical stability against water, organic solvents, and strong oxidants, which benefits from the multi-confinement of CDs by the porous Al2 O3 matrix through rigid network, strong space constraint, and stable covalent bonding. Based on the TDPC property, multilevel coding patterns composed of CDs@Al2 O3 are successfully fabricated for advanced dynamic information encryption.

Bionic Structural Coloration of Textiles Using the Synthetically Prepared Liquid Photonic Crystals.

The structural coloration of textiles with bionic photonic crystals (PCs) is expected to become a critical approach to the ecological coloration of textiles. Rapid and large-area preparation of PC structurally colored textiles can be achieved via self-assembly of high mass fractions of liquid photonic crystals (LPCs). However, the rapid and large-scale manufacturing of LPCs remains a challenge. In this work, the pH regulator is added in the process of emulsion polymerization to solve the problem of phase transformation caused by the thermal decomposition of the initiator to produce H+ , directly achieving 40 wt.% PS nanospheres in the dispersion. Then oligomers and small-molecule salts are removed from the system via dialysis, and the pre-crystallized LPC system is efficiently prepared. Adjusting the particle size and the mass fraction of nanospheres is shown to be an efficient way to control the optical properties of LPCs. The rapid and large-area preparation of PC structural color fabric and the patterned PC structural color fabric with an iridescent effect is implemented by using LPCs as the assembly intermediate. By constructing the encapsulation layer on the surface of the PC structural color fabric, the consistency of high structural stability and high color saturation of the PC is realized.

Versatile Deposition of Complex Colloidal Assemblies from the Evaporation of Hanging Drops.

Existing strategies designed to produce ordered arrangements of colloidal particles on solid supports are of great interest for their wide range of applications, from colloidal lithography, plasmonic and biomimetic surfaces to tags for anti-counterfeiting, but they all share various degrees of complexity hampering their facile implementation. Here, a drastically simplified methodology is presented to achieve ordered particle deposition, consisting in adding micromolar amounts of cationic surfactant to a colloidal suspension drop and let it evaporate in an upside-down configuration. Confinement at the air/water interface enables particle assembly into monolayers, which are then transferred on the substrate producing highly ordered structures displaying vivid, orientation-dependent structural colors. The method is compatible with many particle types and substrates, while controlling system parameters allows tuning the deposit size and morphology, from monocrystals to polycrystalline disks and "irises", from single-component to crystal alloys with Moiré patterns, demonstrating its practicality for a variety of processes.

Dynamic Room Temperature Phosphorescence of Silane-Functionalized Carbon Dots Confining within Silica for Anti-Counterfeiting Applications.

Room temperature phosphorescent (RTP) materials with long-lived, excitation-dependent, and time-dependent phosphorescence are highly desirable but very hard to achieve. Herein, this work reports a rational strategy of multiple wavelength excitation and time-dependent dynamic RTP color by confining silane-functionalized carbon dots (CDs) in a silica matrix (Si-CDs@SiO2 ). The Si-CDs@SiO2 possesses unique green-light-excitation and a change in phosphorescence color from yellow to green. A slow-decaying phosphorescence at 500 nm with a lifetime of 1.28 s and a fast-decaying phosphorescence at 580 nm with a lifetime of 0.90 s are observed under 365 nm of irradiation, which originated from multiple surface triplet states of the Si-CDs@SiO2 . Given the unique dynamic RTP properties, the Si-CDs@SiO2 are demonstrated for applications in fingerprint recognition and multidimensional dynamic information encryption. These findings will open an avenue to explore dynamic phosphorescent materials and significantly broaden their applications.

Influence of Sphericity on Surface Termination of Icosahedral Colloidal Clusters.

Colloids self-organize into icosahedral clusters composed of a Mackay core and an anti-Mackay shell under spherical confinement to minimize the free energy. This study explores the variation of surface arrangements of colloids in icosahedral clusters, focusing on the determining factors behind the surface arrangement. To efficiently assemble particles in emulsion droplets, droplet-to-droplet osmotic extraction from particle-laden droplets to salt-containing droplets is used, where the droplets are microfluidically prepared to guarantee a high size uniformity. The icosahedral clusters are optimally produced during a 24-h consolidation period at a 0.04 m salt concentration. The findings reveal an increase in the number of particle layers from 10 to 15 in the icosahedral clusters as the average number of particles increases from 3300 to 11 000. Intriguingly, the number of layers in the anti-Mackay shells, or surface termination, appears to more strongly depend on the sphericity of the clusters than on the deviation in the particle count from an ideal icosahedral cluster. This result suggests that the sphericity of the outermost layer, formed by the late-stage rearrangement of particles to form an anti-Mackay shell near the droplet interface, may play a pivotal role in determining the surface morphology to accommodate a spherical interface.

Schrödinger's Red Beyond 65,000 Pixel-Per-Inch by Multipolar Interaction in Freeform Meta-Atom through Efficient Neural Optimizer.

Freeform nanostructures have the potential to support complex resonances and their interactions, which are crucial for achieving desired spectral responses. However, the design optimization of such structures is nontrivial and computationally intensive. Furthermore, the current "black box" design approaches for freeform nanostructures often neglect the underlying physics. Here, a hybrid data-efficient neural optimizer for resonant nanostructures by combining a reinforcement learning algorithm and Powell's local optimization technique is presented. As a case study, silicon nanostructures with a highly-saturated red color are designed and experimentally demonstrated. Specifically, color coordinates of (0.677, 0.304) in the International Commission on Illumination (CIE) chromaticity diagram - close to the ideal Schrödinger's red, with polarization independence, high reflectance (>85%), and a large viewing angle (i.e., up to ± 25°) is achieved. The remarkable performance is attributed to underlying generalized multipolar interferences within each nanostructure rather than the collective array effects. Based on that, pixel size down to ≈400 nm, corresponding to a printing resolution of 65000 pixels per inch is demonstrated. Moreover, the proposed design model requires only ≈300 iterations to effectively search a thirteen-dimensional (13D) design space - an order of magnitude more efficient than the previously reported approaches. The work significantly extends the free-form optical design toolbox for high-performance flat-optical components and metadevices.